|
Item#30901 (15oz)
Item#30902 (10oz)
Now Available in Flush & Protect Performance Pack!
Item #98901 |
When you start your engine in the morning, it runs for
up to 60 seconds on the oil film left from the night
before. Scientific studies in operating engines have
shown that the wear rates are close to 50 times greater
during starting than during running. LUBEGARD®
Bio/Tech Engine Protectant has unique patented
LXE (liquid wax esters) additives that
help improve the protection of the oil film against wear
start after start, as well as reducing friction and wear
when the engine is running. Lowering friction within the
engine restores lost energy to you in the form of
improved gas mileage and higher performance when you
need it most.
When added to your oil (either
gas or diesel engines), this exclusive technology
creates a superior high performance lubricant, for use
in all internal combustion engines, that has been proven
by the world's top testing facilities, auto mechanics
and racing professionals to out perform all other
lubricants known.
LUBEGARD® Bio/Tech
Engine Protectant with LXE:
- Eliminates harmful cold
starts
- Reduces wear on metal parts
- Reduces engine temperature
- Increases thermal and
oxidative stability of the oil which eliminates
corrosion, varnish and sludge formation
- Increases overall
performance
- Increases mileage
- Increases oil life
- Increases power
- Does not contain any
potentially harmful "chemical enhancers and/or metal
treatments" such as chlorinated hydrocarbons which
turn into acids & attack metal parts, or any solid
lubricants such as Teflon, graphite or molybdenum
disulfide which clog filtration systems
|
| LUBEGARD®
Bio/Tech Engine Protectant has proven
performance by the world's largest independent lubricant
testing facility by Falex Corporation, the largest
lubricant test equipment manufacturer and by race car
drivers in endurance racing, the harshest of all racing.
Professionals use LUBEGARD® to correct deficiencies in
today's lubricants. Test
results prove LUBEGARD® is the best
protection against metal wear. This test standard
measures wear on metal using comparable motor oils and
engine treatment products.
Sliding friction is the major
type of friction and wear in engines. Sliding friction
occurs at start up in the:
- Main crankshaft bearings,
- Connecting rod bearings
- Where the piston rings
contact the cylinder walls
- Where the push rods or
lifters contact the lobes of the cam shaft
- In the valve guides
- In the hydraulic valve
lifters
LUBEGARD®
Bio-Tech Engine Oil Protectant will reduce Friction
and Wear in these base oils:
| Base Oil
|
Friction
Reduction |
Wear
Reduction |
| Pennzoil |
19.0% |
67.3% |
| Quaker State |
1.1% |
13.2% |
| Havoline |
29.8% |
63.3% |
| Castrol |
29.6% |
78.8% |
| Mobil |
7.3% |
12.5% |
Directions for use:
One bottle of LUBEGARD ® treats one engine. For heavy
duty or commercial use, add 3 ounces to each quart of
motor oil. LUBEGARD ® works immediately to form
superior, long-lasting lubrication to all engine
surfaces.
| Availability |
|
Item # |
Item Name |
Unit
Size |
Case
Qty |
|
30901 |
LUBEGARD® Bio/Tech Engine
Protectant |
15 oz. |
12 |
|
30902 |
LUBEGARD® Bio/Tech Engine
Protectant |
10 oz. |
12 |
|
98901 |
LUBEGARD®
Engine Flush & Bio/Tech Engine Protectant
Performance Pack |
|
6 |
|
