| |
LUBE 'N LOOSEN
BACK
|
$6.49
|
Lube 'N Loosen is the
environmentally safe, non-toxic,
non-flammable way to cut rust and lubricate
everything around the house or shop:
- Household Jobs
- Hinges
- Cars
- Bicycles
- Chains
- Power Tools
- Sewing Machines
- Rust Protection
- Winches and
Cables
- Air Tools
|
LUBEGARD® Lube N'
Loosen Benefits
- Stops squeaks
- Frees sticky
mechanisms
- No. 1 proven
assembly lubricant
- Loosens
difficult rusted bolts
- Protects against
rust/corrosion
- Non-aerosol and
non-flammable
- Biodegradable
(EPA/560/6-82/003), Biodegration Test
ASTM-5864
- Aquatically
Non-toxic (EPA/600/4-90/027)
- Lasts up to 25
times longer
|
|
For
transmission valve body assembly,
click here
COMPARISON OF LUBE 'N LOOSEN and WD-40
|
ATTRIBUTES |
WD-40 Aerosol |
LUBE 'N LOOSEN |
|
HAZARDOUS
INGREDIENTS |
77%-98%
|
0% |
|
NON-HAZARDOUS
INGREDIENTS |
<10% |
100% |
|
CONTENTS
|
|
|
Aliphatic
Petroleum Distillates
Petroleum Base Oil
Propellant
Vegetable Oil Derivatives |
60%-70%
15%-25%
2%-3%
0% |
0%
0%
0%
100% |
|
PROPERTIES
|
|
|
Flash Point
Flammability Limits
Volatile Organic
Compounds (VOC's)
Exposure Limits (vapor)
Biodegradable
Aquatically Nontoxic |
110 F
Lower Limit 1%
Upper Limit 6%
Present
100 ppm
No
Not Mentioned |
480 F
None
None
None
Yes
Yes |
|
PERFORMANCE
|
|
|
Lubrication -
Falex Pin & Vee Initial Wear (1)
Lubrication Persistence -
Falex Pin & Vee Drained Wear (2)
Rust Protection - Humidity Cabinet (3)
Unprotected steel rusted |
Weld failure in 8 min
Weld failure in 105 s
No Rust
|
Full 20 minute run
1.0 mg metal wear in
full 2 minute run
No Rust
|
|
|
(1)
Pins and Vee blocks for the Falex Pin and
Vee testing machine were sprayed with
product and then immediately tested at 250
lbs clamping force for 20 minutes or until
failure of the metal surfaces.
(2) Pins and Vee blocks for the Falex Pin
and Vee testing machine were sprayed with
product, allowed to drain overnight, then
tested at 250 lbs clamping force for 2
minutes or until failure of the metal
surfaces.
(3) Samples of steel wool were sprayed with
the products and placed in a closed
container at 100% humidity at a temperature
of 150 F for 5 hours. |
|
|
|
|
|
| |
|
